Aero Shield VELOCITY - Wheel & Caliper Ceramic Coating 30ml Kit. Part# 6720
30ml Wheel & Caliper Ceramic Coating Kit
Shield Velocity Wheel & Caliper Ceramic coating Kit - 30ml
This 10H ceramic coating uses the highest quality German ingredients and a fortified chemical structure that blocks the most abusive contaminants found in extreme conditions. With the power to withstand pH ranges from less than 3 to over 12, VELOCITY will protect your wheel and caliper finish from acids, salts, cleaners and most paint strippers.
AERO SHIELD VELOCITY uses cutting edge Nano-Hexagonal Matrix Technology, in conjunction with elevated levels of SiO2 and Titanium AERO SHIELD VELOCITY will give you a lifetime of rich, deep gloss while protecting your wheels and calipers from UV fade, scratches and environmental damages for years.
Function: To add a 1 OH ceramic protective coating to wheels, calipers and other highly-exposed areas.
Wash vehicle using AERO SUDS; dry thoroughly. For rough finish due to fallout, prepare surface of vehicle using AERO GLIDE to smooth and remove surface contaminants.
Wipe clean with AERO SHIELD EJECT final prep to remove surface oils.
Apply 7 to 10 drops on applicator. Systematically apply until entire area is covered with coating. Wait for sweat/ flash to occur (30 sec to 3 min) wipe to level with a clean microfiber towel and buff to finish.
Repeat steps until all desired areas are covered.
For additional protection, up to 3 coats may be applied. Wait 1 hour between coats.
AERO SHIELD VELOCITY is fully cured in 7 days.
To extend the life of your coatings, clean with water pressure and a mild pH-balanced soap. Never use acid based or high pH degreasers.
|Unit Of Measure